Backlinks to Petra3Laserwire in all Webs (Search PP/JAI Web only)
PETRA III Laser wire 20Hz Laser Optics This section describes the laser beam path of the laser on the table in the hut including the diagnostics.
Laserwire Introduction The aim of the Laser Based Beam Diagnostics (LBBD) Collaboration was to study the feasibility of laser based diagnostics tools for a future...
PETRA III Laser wire 20Hz Laser Breadboard layout and Diagnostics
PETRA III Laser wire 20Hz Laser Beam path Components
PETRA III Laser wire 20Hz Laser Measurements at the Interaction Point (IP) This section includes waist, M^2, Raleigh range, power made at a virtual focus on the breadboard...
PETRA III Laser wire 20Hz Laser Interlock
PETRA III Laser wire 20Hz Laser Measurements Elog #90, #81 and #80 for waist and M^2 measurement Elog #67 for table of seeded vs unseeded waist, M^2 Raleigh...
PETRA III Laser wire 20Hz Laser Optics in the Hut This section describes the laser beam path in the hut, including the diagnostics, up to the top of the periscope...
PETRA III Laser wire 20Hz Laser Periscope and transport to tunnel This section describes the laser beam path from the tunnel to the breadboard. Immediately after...
PETRA III Laser wire 20Hz Laser Synchronisation This section describes how to sync the laser with the bunches in Petra.
PETRA III Laser wire 20Hz Laser Timing see Elog entry #66 The delay between the Flashlamp (FIRE) and Q switch (QSW) signal should be 165us. Some work was done to...
PETRA III Beta, Dispersion, Momentum spread for LW location Lattice with no Wigglers and Undulators Name S X Y BETX BETY MUX...
PETRA III Laser wire Laserwire Signal and Control cabling This section describes the cable types, lengths and connections.
PETRA III Laser wire Laserwire Operation DAQ and Control This section describes the the main control software (LWDAQ) and the interfaces to the control room. Also...
PETRA III Laser wire Control and Data Acquisition This section contains the LWDAQ code, how to set up the PXI system and a description of the datafiles produced....
PETRA III Laser wire Fast Laser Description The laser used for the new experiment at PETRA III is a Master Oscillator Power Amplifier (MOPA). The laser system is...
PETRA III Laser wire Transport fiber description The laser beam produced by the 4 stages fiber amplifier is coupled into a photonic crystal fiber (PCF) for transport...
PETRA III Laser wire Fast Laser Measurements
PETRA III Laser wire Fast Laser Synchronisation This section describes how to sync the Fast laser with bunches in Petra. The SMB100A (RF source) is described and...
PETRA III Laser wire Fast Laser Timing
PETRA III Laser wire PETRA III First Comptons with Fast Laser (see elog entry #98 for Petra parameters) Compton Signal with Fast laser! Signal (3.5 kW Peak Power...
PETRA III Laser wire Hardware Datasheets and Control Interfaces newport2832C manual.pdf: Tunnel power meter
PETRA III Laser wire PXI system for Laserwire Data Acquisition and Control This section describes the physical connections between cards in the PXI system and the...
PETRA III Laser wire Patch Panel Connector Description The patch panel is located at the base of the 42U rack in the laser room. N type connectors # Signal...
PETRA III Laser wire TINE Data and Instant Client All data produced by the PETRA3 diagnostics and control is accessed by the TINE control system. The LaserWire LWDAQ...
PETRA III Laser wire DAQ Timing This section may be incorporated into the laser Sync sections.
Number of topics: 26