Difference: ATF2BDSIMShiftPlan20150618 (1 vs. 6)

Revision 615 Feb 2016 - LaurieNevay

Line: 1 to 1
 
META TOPICPARENT name="ATF2201506visit"

Shift plan

Line: 15 to 15
 
  • Restore set file, switch on ATF2 feedback, restore position of cavity bpm and collimator

Doug is planning an access, we could move the detectors a bit. \ No newline at end of file

Added:
>
>

<--

Settings just to customise this page

-->
 \ No newline at end of file

Revision 518 Jun 2015 - JsnuverinkSnuverink

Line: 1 to 1
 
META TOPICPARENT name="ATF2201506visit"

Shift plan

Line: 12 to 12
 
  • Vary quadrupoles (really an orbit change)
  • Quadrupole positions
  • Measure PIC traces for some configurations
Changed:
<
<
  • Restore set file, switch on ATF2 feedback
>
>
  • Restore set file, switch on ATF2 feedback, restore position of cavity bpm and collimator
 Doug is planning an access, we could move the detectors a bit.

Revision 418 Jun 2015 - StewartBoogert

Line: 1 to 1
 
META TOPICPARENT name="ATF2201506visit"

Shift plan

  • Save set file
  • Beam off pedestal ADC measurement (background and ATF ICT/BPM)
Added:
>
>
  • Measure optics: dispersion, emittance using OTR, damping ring tunes
  • Response matrix for a few correctors (don't forget to switch off ATF2 feedbacks)
 
  • Charge scan to check detector linearity for different HV
  • Insert each OTR screen, YAG screen
  • Collimator scan & reference cavity scan
Deleted:
<
<
  • Measure optics: dispersion, emittance using OTR, damping ring tunes
  • Response matrix for a few correctors (don't forget to switch off ATF2 feedbacks)
 
  • Vary quadrupoles (really an orbit change)
  • Quadrupole positions
Added:
>
>
  • Measure PIC traces for some configurations
 
  • Restore set file, switch on ATF2 feedback
Deleted:
<
<
 Doug is planning an access, we could move the detectors a bit. \ No newline at end of file

Revision 318 Jun 2015 - JsnuverinkSnuverink

Line: 1 to 1
 
META TOPICPARENT name="ATF2201506visit"

Shift plan

Added:
>
>
  • Save set file
 
  • Beam off pedestal ADC measurement (background and ATF ICT/BPM)
Changed:
<
<
  • Current scan to check detector linearity (how were the HV set?)
  • Insert each screen
  • Vary quadrupoles
  • Collimator scan
  • Reference cavity scan
  • Quadrupole positions (really an orbit change, don't forget to switch off ATF2 feedbacks)
>
>
  • Charge scan to check detector linearity for different HV
  • Insert each OTR screen, YAG screen
  • Collimator scan & reference cavity scan
  • Measure optics: dispersion, emittance using OTR, damping ring tunes
  • Response matrix for a few correctors (don't forget to switch off ATF2 feedbacks)
  • Vary quadrupoles (really an orbit change)
  • Quadrupole positions
  • Restore set file, switch on ATF2 feedback
  Doug is planning an access, we could move the detectors a bit.

Revision 218 Jun 2015 - JsnuverinkSnuverink

Line: 1 to 1
 
META TOPICPARENT name="ATF2201506visit"

Shift plan

Line: 7 to 7
 
  • Insert each screen
  • Vary quadrupoles
  • Collimator scan
Added:
>
>
  • Reference cavity scan
 
  • Quadrupole positions (really an orbit change, don't forget to switch off ATF2 feedbacks)
Changed:
<
<
-- StewartBoogert - 17 Jun 2015
>
>
Doug is planning an access, we could move the detectors a bit.

Revision 117 Jun 2015 - StewartBoogert

Line: 1 to 1
Added:
>
>
META TOPICPARENT name="ATF2201506visit"

Shift plan

  • Beam off pedestal ADC measurement (background and ATF ICT/BPM)
  • Current scan to check detector linearity (how were the HV set?)
  • Insert each screen
  • Vary quadrupoles
  • Collimator scan
  • Quadrupole positions (really an orbit change, don't forget to switch off ATF2 feedbacks)
-- StewartBoogert - 17 Jun 2015
 
This site is powered by the TWiki collaboration platform Powered by PerlCopyright © 2008-2022 by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Ideas, requests, problems regarding RHUL Physics Department TWiki? Send feedback