Difference: AtfBpmNewLogBook_20110609 (1 vs. 2)

Revision 223 Jun 2011 - StewartBoogert

Line: 1 to 1
 
META TOPICPARENT name="AtfBpmNewLogBook"
Improvements made by Boogert, not how to improve Boogert!
Changed:
<
<
1. [X] Check S-band windows computer 2. [X] Shift all code over to atfopr 3. [X] Sort out run scripts 4. [X] Remove comments from casr python 5. [X] Add pure magnitude and angle arrays for archiving 6. [X] Archive every pulse (t0, Amp, Phase, I, Q etc) for stability,cal tone measurements 7. [X] Add saturation variables (ilastunstat, sample point etc) 8. [X] Expand bpm_sis.map to bpmConfig.txt 9. [X] Update edm to reflect new bpmConfig.txt 10. [X] Automatic EDM summary construction 11. [X] Automatic EDM waveform construction 12. [X] BpmHardware database control needs updating (for setting everything) 13. [X] Executable script for setting everything ("./bpmDbSetAll.py -s CBAND -p debuglevel -v 0") 14. [X] Autoscale waveform plots 15. [X] Automatic EDM parameter construction 16. [X] Shell script for digitizer configuraiton 17. [X] Autoscale bpm waveform plots (inwards) 18. [X] Email Terunuma with new BPM map 19. [X] Remove BpmGlobal.py generate Global information from Bpm.Map 20. [X] Fix bug with long record waveformoutput 21. [X] Keep db static and flag in/out processing 22. [X] match input data and set up input data monitors properly 23. [X] bpmConfig in cbpm database? Arrays of strings 24. [X] Fill static database at bpm.sh start 25. [X] Check calstate and state variable update 26. [X] cbpm:status and BPM:state (remove cbpm:status) 27. [X] Put attenuators into bpmConfig (echo to db for capture during acquisition) 28. [X] Check basic single acquisition with new bpmConfig.txt 29. [X] Check full loggers, waveform (needs checking) and orbit (working but needs to be augmented) 30. [X] Understand and commission readout of slac digitisers 31. [X] check LOs and calibration tones (ok seem not to be on, but everything energised) 32. [X] Saturation for SLAC digitizers 33. [X] Add saturation variable arrays 34. [X] Check S-band readout (Problem booting S-band crate, find out about delivery of controller) 35. [X] Check installed attenuators 36. [X] S-band computer (new account atfopr 20.10.67.199 cbpm-win.atf-local) 37. [X] nbpm and npol in database configuration 38. [X] Add all "BPM" records to cbpm:name, cbpm:freq, cbpm:type etc (57 "BPMs") 39. [X] Both references on same bpm.edl
>
>
1. [ ] Check S-band windows computer 2. [ ] Shift all code over to atfopr 3. [ ] Sort out run scripts 4. [ ] Remove comments from casr python 5. [ ] Add pure magnitude and angle arrays for archiving 6. [ ] Archive every pulse (t0, Amp, Phase, I, Q etc) for stability,cal tone measurements 7. [ ] Add saturation variables (ilastunstat, sample point etc) 8. [ ] Expand bpm_sis.map to bpmConfig.txt 9. [ ] Update edm to reflect new bpmConfig.txt 10. [ ] Automatic EDM summary construction 11. [ ] Automatic EDM waveform construction 12. [ ] BpmHardware database control needs updating (for setting everything) 13. [ ] Executable script for setting everything ("./bpmDbSetAll.py -s CBAND -p debuglevel -v 0") 14. [ ] Autoscale waveform plots 15. [ ] Automatic EDM parameter construction 16. [ ] Shell script for digitizer configuraiton 17. [ ] Autoscale bpm waveform plots (inwards) 18. [ ] Email Terunuma with new BPM map 19. [ ] Remove BpmGlobal.py generate Global information from Bpm.Map 20. [ ] Fix bug with long record waveformoutput 21. [ ] Keep db static and flag in/out processing 22. [ ] match input data and set up input data monitors properly 23. [ ] bpmConfig in cbpm database? Arrays of strings 24. [ ] Fill static database at bpm.sh start 25. [ ] Check calstate and state variable update 26. [ ] cbpm:status and BPM:state (remove cbpm:status) 27. [ ] Put attenuators into bpmConfig (echo to db for capture during acquisition) 28. [ ] Check basic single acquisition with new bpmConfig.txt 29. [ ] Check full loggers, waveform (needs checking) and orbit (working but needs to be augmented) 30. [ ] Understand and commission readout of slac digitisers 31. [ ] check LOs and calibration tones (ok seem not to be on, but everything energised) 32. [ ] Saturation for SLAC digitizers 33. [ ] Add saturation variable arrays 34. [ ] Check S-band readout (Problem booting S-band crate, find out about delivery of controller) 35. [ ] Check installed attenuators 36. [ ] S-band computer (new account atfopr 20.10.67.199 cbpm-win.atf-local) 37. [ ] nbpm and npol in database configuration 38. [ ] Add all "BPM" records to cbpm:name, cbpm:freq, cbpm:type etc (57 "BPMs") 39. [ ] Both references on same bpm.edl
  40. [ ] fix usage of optparse
Changed:
<
<
41. [X] Log system configuration in LogAllPro and LogAllWf
>
>
41. [ ] Log system configuration in LogAllPro and LogAllWf
  42. [ ] All logAllPro and logAllWf to EDM display 43. [ ] Check archiver variables 44. [ ] Test SLAC digitizer with 50 ohm magic T
Line: 54 to 54
  49. [ ] REFIP1/2 needs attenuation 50. [ ] Create system map diagrams 51. [ ] Merge to single Linux mac version on mac drive
Changed:
<
<
52. [X] Clean up working directory. cron+rync backup to RHUL
>
>
52. [ ] Clean up working directory. cron+rync backup to RHUL
  53. [ ] gzipped data reading 54. [ ] Data sync with RHUL 55. [ ] Switched pulse by pulse cal tone correction
Line: 70 to 70
  65. [ ] Switchable cothread applied to all macros 66. [ ] Clean code base 67. [ ] Digitizers noise spectrum
Changed:
<
<
68. [X] Take complete set of screen shots
>
>
68. [ ] Take complete set of screen shots
  69. [ ] Update TWiki with new instructions 70. [ ] Corrector - amplitude orbit response, steer to BPM centre. For BPM studies and quick calibration

Revision 118 Jun 2011 - StewartBoogert

Line: 1 to 1
Added:
>
>
META TOPICPARENT name="AtfBpmNewLogBook"
Improvements made by Boogert, not how to improve Boogert!

  1. [X] Check S-band windows computer 
  2. [X] Shift all code over to atfopr
  3. [X] Sort out run scripts
  4. [X] Remove comments from casr python
  5. [X] Add pure magnitude and angle arrays for archiving
  6. [X] Archive every pulse (t0, Amp, Phase, I, Q etc) for stability,cal tone measurements
  7. [X] Add saturation variables (ilastunstat, sample point etc)
  8. [X] Expand bpm_sis.map to bpmConfig.txt
  9. [X] Update edm to reflect new bpmConfig.txt
  10. [X] Automatic EDM summary construction 
  11. [X] Automatic EDM waveform construction
  12. [X] BpmHardware database control needs updating (for setting everything)
  13. [X] Executable script for setting everything ("./bpmDbSetAll.py -s CBAND -p debuglevel -v 0")
  14. [X] Autoscale waveform plots
  15. [X] Automatic EDM parameter construction
  16. [X] Shell script for digitizer configuraiton
  17. [X] Autoscale bpm waveform plots (inwards)
  18. [X] Email Terunuma with new BPM map
  19. [X] Remove BpmGlobal.py generate Global information from Bpm.Map
  20. [X] Fix bug with long record waveformoutput
  21. [X] Keep db static and flag in/out processing
  22. [X] match input data and set up input data monitors properly
  23. [X] bpmConfig in cbpm database? Arrays of strings
  24. [X] Fill static database at bpm.sh start
  25. [X] Check calstate and state variable update 
  26. [X] cbpm:status and BPM:state (remove cbpm:status)
  27. [X] Put attenuators into bpmConfig (echo to db for capture during acquisition)
  28. [X] Check basic single acquisition with new bpmConfig.txt
  29. [X] Check full loggers, waveform (needs checking) and orbit (working but needs to be augmented)
  30. [X] Understand and commission readout of slac digitisers
  31. [X] check LOs and calibration tones (ok seem not to be on, but everything energised)
  32. [X] Saturation for SLAC digitizers 
  33. [X] Add saturation variable arrays
  34. [X] Check S-band readout (Problem booting S-band crate, find out about delivery of controller)
  35. [X] Check installed attenuators
  36. [X] S-band computer (new account atfopr 20.10.67.199 cbpm-win.atf-local)
  37. [X] nbpm and npol in database configuration
  38. [X] Add all "BPM" records to cbpm:name, cbpm:freq, cbpm:type etc (57 "BPMs")
  39. [X] Both references on same bpm.edl
  40. [ ] fix usage of optparse
  41. [X] Log system configuration in LogAllPro and LogAllWf
  42. [ ] All logAllPro and logAllWf to EDM display
  43. [ ] Check archiver variables
  44. [ ] Test SLAC digitizer with 50 ohm magic T
  45. [ ] Measure attenuation of S-band cables
  46. [ ] Cut down S-Band cables
  47. [ ] Fix problem with C-band cal tone
  48. [ ] New cable layout diagrams and notes
  49. [ ] REFIP1/2 needs attenuation
  50. [ ] Create system map diagrams
  51. [ ] Merge to single Linux mac version on mac drive
  52. [X] Clean up working directory. cron+rync backup to RHUL
  53. [ ] gzipped data reading
  54. [ ] Data sync with RHUL
  55. [ ] Switched pulse by pulse cal tone correction
  56. [ ] Tracker Integration
  57. [ ] Integrated simulation (ks, rmat)
  58. [ ] Online jitter plot
  59. [ ] Switched trigger correction
  60. [ ] Integrated simulation mode
  61. [ ] Data replay
  62. [ ] Data gateway to rhul?
  63. [ ] Parameter tuning
  64. [ ] Latex on plots
  65. [ ] Switchable cothread applied to all macros
  66. [ ] Clean code base
  67. [ ] Digitizers noise spectrum
  68. [X] Take complete set of screen shots
  69. [ ] Update TWiki with new instructions
  70. [ ] Corrector - amplitude orbit response, steer to BPM centre. For BPM studies and quick calibration

<--

Settings just to customise this page

-->
 
This site is powered by the TWiki collaboration platform Powered by PerlCopyright © 2008-2022 by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Ideas, requests, problems regarding RHUL Physics Department TWiki? Send feedback