Difference: AtfBpmNewLogBook_20130412 (1 vs. 10)

Revision 1012 Apr 2013 - JsnuverinkSnuverink

Line: 1 to 1

META TOPICPARENT	name="AtfBpmNewLogBook"

01:00 Started shift

Line: 218 to 218

beam intensity scan up to 0.45

Added:

>
>

charge 0.45

vert mover scan

Added:

>
>

mover position (mm)	filename
0.0	bpmAllLog_20130412_071841.dat.gz
1.0	bpmAllLog_20130412_071931.dat.gz
2.0	bpmAllLog_20130412_072021.dat.gz
3.0	bpmAllLog_20130412_072111.dat.gz
4.0	bpmAllLog_20130412_072213.dat.gz
0.0	bpmAllLog_20130412_072340.dat.gz
-1.0	bpmAllLog_20130412_072438.dat.gz
-2.0	bpmAllLog_20130412_072528.dat.gz
-3.0	bpmAllLog_20130412_072622.dat.gz
-4.0	bpmAllLog_20130412_072712.dat.gz
0.0	bpmAllLog_20130412_072851.dat.gz

charge 0.4 (later 0.35)

resolution data: bpmAllLog_20130412_073500.dat.gz

vert mover scan

Added:

>
>

mover position (mm)	filename
0.0	bpmAllLog_20130412_073707.dat.gz
1.0	bpmAllLog_20130412_073800.dat.gz
2.0	bpmAllLog_20130412_073852.dat.gz
3.0	bpmAllLog_20130412_073945.dat.gz
4.0	bpmAllLog_20130412_074034.dat.gz
0.0	bpmAllLog_20130412_074153.dat.gz
-1.0	bpmAllLog_20130412_074246.dat.gz
-2.0	bpmAllLog_20130412_074336.dat.gz
-3.0	bpmAllLog_20130412_074426.dat.gz
-4.0	bpmAllLog_20130412_074518.dat.gz
0.0	bpmAllLog_20130412_074632.dat.gz

charge 0.3

Line: 233 to 259

resolution data: bpmAllLog_20130412_075227.dat.gz

vert. mover scan

Added:

>
>

mover position (mm)	filename
0.0	bpmAllLog_20130412_075429.dat.gz
1.0	bpmAllLog_20130412_075517.dat.gz
2.0	bpmAllLog_20130412_075623.dat.gz
3.0	bpmAllLog_20130412_075718.dat.gz
4.0	bpmAllLog_20130412_075808.dat.gz
0.0	bpmAllLog_20130412_075941.dat.gz (one wrong file skipped!)
-1.0	bpmAllLog_20130412_080032.dat.gz
-2.0	bpmAllLog_20130412_080127.dat.gz
-3.0	bpmAllLog_20130412_080221.dat.gz
-4.0	bpmAllLog_20130412_080311.dat.gz
0.0	bpmAllLog_20130412_080433.dat.gz

charge 0.25 -> 0.20

Changed:

<
<

vert. mover sscan.

>
>

vert. mover scan

mover position (mm)	filename
0.0	bpmAllLog_20130412_080723.dat.gz
1.0	bpmAllLog_20130412_080813.dat.gz
2.0	bpmAllLog_20130412_080902.dat.gz
3.0	bpmAllLog_20130412_080952.dat.gz
4.0	bpmAllLog_20130412_081040.dat.gz
0.0	bpmAllLog_20130412_081153.dat.gz
-1.0	bpmAllLog_20130412_081244.dat.gz
-2.0	bpmAllLog_20130412_081343.dat.gz
-3.0	bpmAllLog_20130412_081437.dat.gz
-4.0	bpmAllLog_20130412_081533.dat.gz
0.0	bpmAllLog_20130412_081704.dat.gz

charge 0.20

Changed:

<
<

>
>

vert. mover scan

mover position (mm)	filename
0.0	bpmAllLog_20130412_081929.dat.gz
1.0	bpmAllLog_20130412_082021.dat.gz
2.0	bpmAllLog_20130412_082110.dat.gz
3.0	bpmAllLog_20130412_082159.dat.gz
4.0	bpmAllLog_20130412_082247.dat.gz
0.0	bpmAllLog_20130412_082400.dat.gz
-1.0	bpmAllLog_20130412_082449.dat.gz
-2.0	bpmAllLog_20130412_082536.dat.gz
-3.0	bpmAllLog_20130412_082629.dat.gz
-4.0	bpmAllLog_20130412_082719.dat.gz
0.0	bpmAllLog_20130412_082840.dat.gz

charge 0.15

vert. mover scan

Added:

>
>

mover position (mm)	filename
0.0	bpmAllLog_20130412_083201.dat.gz
1.0	bpmAllLog_20130412_083249.dat.gz
2.0	bpmAllLog_20130412_083338.dat.gz
3.0	bpmAllLog_20130412_083427.dat.gz
4.0	bpmAllLog_20130412_083519.dat.gz
0.0	bpmAllLog_20130412_083640.dat.gz
-1.0	bpmAllLog_20130412_083748.dat.gz
-2.0	bpmAllLog_20130412_083839.dat.gz
-3.0	bpmAllLog_20130412_083929.dat.gz
-4.0	bpmAllLog_20130412_084017.dat.gz
0.0	bpmAllLog_20130412_084136.dat.gz

charge 0.10

vert. mover scan

mover position (mm)	filename
0.0	bpmAllLog_20130412_084449.dat.gz
1.0	bpmAllLog_20130412_084547.dat.gz
2.0	bpmAllLog_20130412_084636.dat.gz
3.0	bpmAllLog_20130412_084745.dat.gz
4.0	bpmAllLog_20130412_084836.dat.gz
0.0	bpmAllLog_20130412_084953.dat.gz
-1.0	bpmAllLog_20130412_085044.dat.gz
-2.0	bpmAllLog_20130412_085135.dat.gz
-3.0	bpmAllLog_20130412_085225.dat.gz
-4.0	bpmAllLog_20130412_085320.dat.gz
0.0	bpmAllLog_20130412_085433.dat.gz

Revision 912 Apr 2013 - JsnuverinkSnuverink

Line: 1 to 1

META TOPICPARENT	name="AtfBpmNewLogBook"

01:00 Started shift

ATF logbook: http://atf.kek.jp/twiki/bin/view/ATFlogbook/Log20130412o

Added:

>
>

present: Alexey, Jochem, Young-Im

stability data taken: bpmAllLog_20130412_010024.dat.gz

tunnel access to look at IPREF-x

Line: 116 to 118

-4.0	bpmAllLog_20130412_040231.dat.gz
0.0	bpmAllLog_20130412_040345.dat.gz

Changed:

<
<

Calibration at DR RF 0.33MV:

>
>

Calibration at DR RF 0.33MV

we discovered orbit feedback was disturbing for the mover magnets, so switched to sextupole CBPMs (sextupoles were switched off) charge : 0.3-0.4

CBPM	method	filename
QD10X	BumpX	bpmAllLog_20130412_040749.dat.gz
QD10X	BumpY	bpmAllLog_20130412_041004.dat.gz
QD18X	BumpX	bpmAllLog_20130412_041216.dat.gz
QD18X	BumpY	bpmAllLog_20130412_041432.dat.gz
QM16FF	Svd X	bpmAllLog_20130412_041710.dat.gz
QM16FF	Svd Y	bpmAllLog_20130412_042205.dat.gz
SF5FF	Svd X	bpmAllLog_20130412_044319.dat.gz
SF5FF	Svd Y	bpmAllLog_20130412_044446.dat.gz
SF6FF	Svd X	bpmAllLog_20130412_050354.dat.gz
SF6FF	Svd Y	bpmAllLog_20130412_050612.dat.gz

intensity 0.4-0.5 hor. scan DR 0.28MV

mover position (mm)

filename

Line: 132 to 148

-4.0	bpmAllLog_20130412_051949.dat.gz
0.0	bpmAllLog_20130412_052121.dat.gz

Changed:

<
<

Calibration at DR RF 0.22MV

>
>

Calibration at DR RF 0.22MV, charge 0.3-0.4

CBPM	method	filename
QD10X	BumpX	bpmAllLog_20130412_052506.dat.gz
QD10X	BumpY	bpmAllLog_20130412_052737.dat.gz
QD18X	BumpX	bpmAllLog_20130412_053007.dat.gz
QD18X	BumpY	bpmAllLog_20130412_053230.dat.gz (bad FB?)
QM16FF	Svd X	bpmAllLog_20130412_053553.dat.gz
QM16FF	Svd Y	bpmAllLog_20130412_054016.dat.gz
SF5FF	Svd X	bpmAllLog_20130412_054503.dat.gz
SF5FF	Svd Y	bpmAllLog_20130412_054712.dat.gz
SF6FF	Svd X	bpmAllLog_20130412_055052.dat.gz
SF6FF	Svd Y	bpmAllLog_20130412_055305.dat.gz

ATF feedback off

Line: 152 to 180

ERROR in the bump SVD calibration script

Changed:

<
<

Svd subtraction was not used during the initial calibration due to this error bpmAllFsBumpCalibration_20130412_061810.dat.gz

>
>

Svd subtraction was not used during the initial calibration due to this error bpmAllFsBumpCalibration_20130412_061810.dat.gz

Traceback (most recent call last):

Line: 169 to 196

Added:

>
>

Calibration at DR RF 0.28MV, feedback off charge 0.2-0.3

CBPM	method	filename
QD10X	BumpX	bpmAllLog_20130412_060825.dat.gz
QD10X	BumpY	bpmAllLog_20130412_061054.dat.gz
QD18X	BumpX	bpmAllLog_20130412_061321.dat.gz
QD18X	BumpY	bpmAllLog_20130412_061539.dat.gz
QD18X	Svd X	bpmAllLog_20130412_061810.dat.gz
QD18X	Svd Y	bpmAllLog_20130412_062352.dat.gz
QM16FF	Svd X	bpmAllLog_20130412_062625.dat.gz
QM16FF	Svd Y	bpmAllLog_20130412_063010.dat.gz
QM15FF	Svd X	bpmAllLog_20130412_063728.dat.gz
QM15FF	Svd Y	bpmAllLog_20130412_064052.dat.gz
SF6FF	Svd X	bpmAllLog_20130412_070941.dat.gz
SF6FF	Svd Y	bpmAllLog_20130412_071116.dat.gz
SF5FF	Svd X	bpmAllLog_20130412_071400.dat.gz
SF5FF	Svd Y	bpmAllLog_20130412_071555.dat.gz

tuning of beam by Araki-san

beam intensity scan up to 0.45

vert mover scan

charge 0.4 (later 0.35)

resolution data: bpmAllLog_20130412_073500.dat.gz

vert mover scan

charge 0.3

resolution data: bpmAllLog_20130412_074907.dat.gz (but charge went up to 0.35! .. sun rising..)

resolution data: bpmAllLog_20130412_075227.dat.gz

vert. mover scan

charge 0.25 -> 0.20

vert. mover sscan.

charge 0.20

vert. mover scan

Revision 811 Apr 2013 - AlexeyLyapin

Line: 1 to 1

META TOPICPARENT	name="AtfBpmNewLogBook"

01:00 Started shift

Line: 150 to 150

-4.0	bpmAllLog_20130412_060502.dat.gz
0.0	bpmAllLog_20130412_060617.dat.gz

Added:

>
>

ERROR in the bump SVD calibration script

Svd subtraction was not used during the initial calibration due to this error bpmAllFsBumpCalibration_20130412_061810.dat.gz

Traceback (most recent call last):
  File "./bpmSvdFsBumpCal.py", line 97, in ?
    main()
  File "./bpmSvdFsBumpCal.py", line 63, in main
    dfn = fsb.calibrate(npulse,startpos,endpos,nstep)
  File "/atf/control/epics/atf2/cbpm/run/Bpm.py", line 3596, in calibrate
    self.ld.write(self.f)
  File "/atf/control/epics/atf2/cbpm/run/Bpm.py", line 2398, in write
    for v in self.bump[ind] :
IndexError: list index out of range

Revision 711 Apr 2013 - JsnuverinkSnuverink

Line: 1 to 1

META TOPICPARENT	name="AtfBpmNewLogBook"

01:00 Started shift

Line: 31 to 31

start wakefield scan, but reference cavity mover panel not responding. tunnel access to check if power is on.

beam access to look if MREF power on. control module under IPT was not in 'remote' mode (green/red button). MREF mover working now

Added:

>
>

resolution data:

ATF feedback on

MREF scans (files and details added later):

intensity 0.4-0.5 vert. scan DR 0.28MV

mover position (mm)	filename
0.0	bpmAllLog_20130412_025010.dat.gz
1.0	bpmAllLog_20130412_025127.dat.gz
2.0	bpmAllLog_20130412_025220.dat.gz
3.0	bpmAllLog_20130412_025314.dat.gz
4.0	bpmAllLog_20130412_025405.dat.gz
0.0	bpmAllLog_20130412_025533.dat.gz
-1.0	bpmAllLog_20130412_025624.dat.gz
-2.0	bpmAllLog_20130412_025716.dat.gz
-3.0	bpmAllLog_20130412_025809.dat.gz
-4.0	bpmAllLog_20130412_025858.dat.gz
0.0	bpmAllLog_20130412_030010.dat.gz

MREF mover pos (0.0,0.0)

DR 0.27 MV: bpmAllLog_20130412_030752.dat.gz

DR 0.25 MV: bpmAllLog_20130412_031217.dat.gz

intensity 0.4 vert. scan DR 0.25MV

mover position (mm)	filename
0.0	bpmAllLog_20130412_031217.dat.gz
1.0	bpmAllLog_20130412_031310.dat.gz
2.0	bpmAllLog_20130412_031401.dat.gz
3.0	bpmAllLog_20130412_031454.dat.gz
4.0	bpmAllLog_20130412_031549.dat.gz
0.0	bpmAllLog_20130412_031705.dat.gz
-1.0	bpmAllLog_20130412_031756.dat.gz
-2.0	bpmAllLog_20130412_031911.dat.gz
-3.0	bpmAllLog_20130412_032007.dat.gz
-4.0	bpmAllLog_20130412_032102.dat.gz
0.0	bpmAllLog_20130412_032219.dat.gz

intensity 0.4 vert. scan DR 0.22MV

mover position (mm)	filename
0.0	bpmAllLog_20130412_032445.dat.gz
1.0	bpmAllLog_20130412_032535.dat.gz
2.0	bpmAllLog_20130412_032629.dat.gz
3.0	bpmAllLog_20130412_032727.dat.gz
4.0	bpmAllLog_20130412_032832.dat.gz
0.0	bpmAllLog_20130412_032946.dat.gz
-1.0	bpmAllLog_20130412_033039.dat.gz
-2.0	bpmAllLog_20130412_033132.dat.gz
-3.0	bpmAllLog_20130412_033224.dat.gz
-4.0	bpmAllLog_20130412_033314.dat.gz
0.0	bpmAllLog_20130412_033430.dat.gz

(<0.2MV DR unstable and beam lost)

intensity 0.4-0.5 vert. scan DR 0.31MV

mover position (mm)	filename
0.0	bpmAllLog_20130412_034027.dat.gz
1.0	bpmAllLog_20130412_034118.dat.gz
2.0	bpmAllLog_20130412_034206.dat.gz
3.0	bpmAllLog_20130412_034257.dat.gz
4.0	bpmAllLog_20130412_034346.dat.gz
0.0	bpmAllLog_20130412_034459.dat.gz
-1.0	bpmAllLog_20130412_034554.dat.gz
-2.0	bpmAllLog_20130412_034643.dat.gz
-3.0	bpmAllLog_20130412_034734.dat.gz
-4.0	bpmAllLog_20130412_034826.dat.gz
0.0	bpmAllLog_20130412_034938.dat.gz

intensity 0.4-0.5 vert. scan DR 0.33MV (max)

mover position (mm)	filename
0.0	bpmAllLog_20130412_035301.dat.gz
1.0	bpmAllLog_20130412_035354.dat.gz
2.0	bpmAllLog_20130412_035444.dat.gz
3.0	bpmAllLog_20130412_035539.dat.gz
4.0	bpmAllLog_20130412_035638.dat.gz
0.0	bpmAllLog_20130412_035751.dat.gz
-1.0	bpmAllLog_20130412_035844.dat.gz
-2.0	bpmAllLog_20130412_035937.dat.gz (ICT PV was added!)
-3.0	bpmAllLog_20130412_040134.dat.gz (careful one log in between is wrong!)
-4.0	bpmAllLog_20130412_040231.dat.gz
0.0	bpmAllLog_20130412_040345.dat.gz

Calibration at DR RF 0.33MV:

intensity 0.4-0.5 hor. scan DR 0.28MV

mover position (mm)	filename
0.0	bpmAllLog_20130412_051105.dat.gz
1.0	bpmAllLog_20130412_051201.dat.gz
2.0	bpmAllLog_20130412_051300.dat.gz
3.0	bpmAllLog_20130412_051351.dat.gz
4.0	bpmAllLog_20130412_051446.dat.gz
0.0	bpmAllLog_20130412_051615.dat.gz
-1.0	bpmAllLog_20130412_051713.dat.gz
-2.0	bpmAllLog_20130412_051805.dat.gz
-3.0	bpmAllLog_20130412_051856.dat.gz
-4.0	bpmAllLog_20130412_051949.dat.gz
0.0	bpmAllLog_20130412_052121.dat.gz

Calibration at DR RF 0.22MV

ATF feedback off

intensity 0.4->0.3 vert. scan DR 0.28MV

mover position (mm)	filename
0.0	bpmAllLog_20130412_055652.dat.gz
1.0	bpmAllLog_20130412_055742.dat.gz
2.0	bpmAllLog_20130412_055842.dat.gz
3.0	bpmAllLog_20130412_055931.dat.gz
4.0	bpmAllLog_20130412_060022.dat.gz
0.0	bpmAllLog_20130412_060138.dat.gz
-1.0	bpmAllLog_20130412_060233.dat.gz
-2.0	bpmAllLog_20130412_060321.dat.gz
-3.0	bpmAllLog_20130412_060413.dat.gz
-4.0	bpmAllLog_20130412_060502.dat.gz
0.0	bpmAllLog_20130412_060617.dat.gz

<--
 Settings just to customise this page 
 
 Set STYLESIDEBAR = off
  Set ALLOWTOPICVIEW = TWikiGuest, JohnAdamsInstituteGroup
  Set MYTITLE = - John Adams Institute Accelerator science
 
-->

Revision 611 Apr 2013 - JsnuverinkSnuverink

Line: 1 to 1

META TOPICPARENT	name="AtfBpmNewLogBook"

01:00 Started shift

Line: 26 to 26

calibrate QD10BFF-x (saturated) QD10BFF-y

Changed:

<
<

Resolution data after the calibration bpmAllLog_20130412_021441.dat.gz

>
>

Resolution data after the calibration bpmAllLog_20130412_021441.dat.gz

Added:

>
>

start wakefield scan, but reference cavity mover panel not responding. tunnel access to check if power is on.

Changed:

<
<

-- AlexeyLyapin - 11 Apr 2013

>
>

beam access to look if MREF power on. control module under IPT was not in 'remote' mode (green/red button). MREF mover working now

Revision 511 Apr 2013 - AlexeyLyapin

Line: 1 to 1

META TOPICPARENT	name="AtfBpmNewLogBook"

01:00 Started shift

Line: 26 to 26

calibrate QD10BFF-x (saturated) QD10BFF-y

Added:

>
>

Resolution data after the calibration bpmAllLog_20130412_021441.dat.gz

-- AlexeyLyapin - 11 Apr 2013

Revision 411 Apr 2013 - JsnuverinkSnuverink

Line: 1 to 1

META TOPICPARENT	name="AtfBpmNewLogBook"

01:00 Started shift

Line: 8 to 8

tunnel access to look at IPREF-x

Changed:

<
<

* remove amplifier from IPREF-x and remove some attenuation * add attenuator to QD10BFF-y (had no attenuation previously) *

>
>

remove amplifier from IPREF-x and remove some attenuation.

Added:

>
>

add attenuator to QD10BFF-y (had no attenuation previously)

01:30 beam back on

IPREF-x not fixed.

beam off

LO back the way it was. amplifier on , attenuation on. swapped electronics channel 2

02:00 beam back on

IPREF-x not fixed. check later and move on.

calibrate QD10BFF-x (saturated) QD10BFF-y

-- AlexeyLyapin - 11 Apr 2013 \ No newline at end of file

Revision 311 Apr 2013 - AlexeyLyapin

Line: 1 to 1

META TOPICPARENT	name="AtfBpmNewLogBook"

01:00 Started shift

Line: 8 to 8

tunnel access to look at IPREF-x

Changed:

<
<

remove amplifier from IPREF-x and remove some attenuation

>
>

* remove amplifier from IPREF-x and remove some attenuation * add attenuator to QD10BFF-y (had no attenuation previously) *

Deleted:

<
<

add attenuator to QD10BFF-y (had no attenuation previously)

-- AlexeyLyapin - 11 Apr 2013

Revision 211 Apr 2013 - JsnuverinkSnuverink

Line: 1 to 1

META TOPICPARENT	name="AtfBpmNewLogBook"

01:00 Started shift

ATF logbook: http://atf.kek.jp/twiki/bin/view/ATFlogbook/Log20130412o

Added:

>
>

stability data taken: bpmAllLog_20130412_010024.dat.gz

Added:

>
>

tunnel access to look at IPREF-x

remove amplifier from IPREF-x and remove some attenuation

add attenuator to QD10BFF-y (had no attenuation previously)

-- AlexeyLyapin - 11 Apr 2013

Revision 111 Apr 2013 - AlexeyLyapin

Line: 1 to 1

Added:

>
>

META TOPICPARENT	name="AtfBpmNewLogBook"

01:00 Started shift

ATF logbook: http://atf.kek.jp/twiki/bin/view/ATFlogbook/Log20130412o

-- AlexeyLyapin - 11 Apr 2013

View topic | History: r10 < r9 < r8 < r7 | More topic actions...

Copyright © 2008-2023 by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Ideas, requests, problems regarding RHUL Physics Department TWiki? Send feedback