Line: 1 to 1 | ||||||||
---|---|---|---|---|---|---|---|---|
Digitiser Effects | ||||||||
Changed: | ||||||||
< < | In order to investigate the effect of the digitiser specifications, the noise and non-linearities of the electronics were removed. This allowed the limits imposed on the resolution by the digitiser noise to be determined. | |||||||
> > | In order to investigate the effect of the digitiser specifications, the noise and non-linearities of the electronics were removed. This allowed the limits imposed on the resolution by the digitiser noise to be determined. A simulation was run with the same parameters as in ClicSigProc but with a position sweep in x with a single train at each point so that the minimum resolution of the digitiser is visible. The minimum offset visible above the digitiser noise was also determined. This came to 170 nm and is the same for both deconvolution and DDC processing algorithms. The bandwidth of the digital filter used for the DDC was 45 MHz in both cases. | |||||||
Added: | ||||||||
> > | The plot on the left shows the results of the position sweep using the sample at 75 ns from the start of the beam signal. The plot on the right shows the resolution determined from the points in the sweep where the signal was large enough to be observed for each sample that measured a signal from the beam. | |||||||
Added: | ||||||||
> > | ![]() ![]() | |||||||
Added: | ||||||||
> > | <--
| |||||||
Added: | ||||||||
> > |
|