Cavity BPM systems work

Aim to provide long term stable BPM system operating at the best possible resolution.

  • Hardware measurements (related to BPM design, systematics etc)
  • Operations (beam based measurements)
  • First pulse operation

Hardware measurements

  1. Electronics gain (weekend measurement)
  2. Calibration tone (continuous measurement)

Online measurements and tests

  1. Individual BPM calibrations
  2. Dynamic range, coupling strength (requires electronics gain), linearity
  3. Cross coupling (x-y)
  4. Resolution (simple, jitter removed)
  5. Tone calibration system
  6. Temperature monitoring system

First pulse operation (still useful test for ILC)

  1. Measure precisely phase of each signal cable
  2. Local oscillator phase
  3. Phase difference for each BPM due to beam propagation
Edit | Attach | Watch | Print version | History: r6 < r5 < r4 < r3 < r2 | Backlinks | Raw View | Raw edit | More topic actions...

Physics WebpagesRHUL WebpagesCampus Connect • Royal Holloway, University of London, Egham, Surrey TW20 0EX; Tel/Fax +44 (0)1784 434455/437520

Topic revision: r4 - 21 Dec 2008 - StewartBoogert

  • Edit
  • Attach
This site is powered by the TWiki collaboration platform Powered by PerlCopyright © 2008-2023 by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Ideas, requests, problems regarding RHUL Physics Department TWiki? Send feedback