Electronics Simulation

RF Filter

Sweeps of the RF filter bandwidth were simulated to see the effect on the signal to noise ratio, the signal rise time and the maximum signal level. An absolute maximum bandwidth for the electronics is 400MHz coming from the intermediate frequency of 200MHz. The signal to noise ratio goes as the square root of the filter bandwidth as expected.

rffiltbw.png linrffilt.png

The maximum signal level is slightly reduced with decreasing filter bandwidth but not by much and not enough to effect the signal to noise ratio.

rffiltgain.png

The rise time of the multibunch waveform is dominated by the bunch structure and not the bandwidth of the filter until you get to a threshold value when it begins to increase rapidly. This should not be a problem for the first set of electronics but in may become important if a slower, higher resolution digitiser is chosen.

allrise.png risebw.png

Edit | Attach | Watch | Print version | History: r4 < r3 < r2 < r1 | Backlinks | Raw View | Raw edit | More topic actions...

Physics WebpagesRHUL WebpagesCampus Connect • Royal Holloway, University of London, Egham, Surrey TW20 0EX; Tel/Fax +44 (0)1784 434455/437520

Topic revision: r2 - 27 Apr 2012 - FrancisCullinan

 
  • Edit
  • Attach
This site is powered by the TWiki collaboration platform Powered by PerlCopyright © 2008-2022 by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Ideas, requests, problems regarding RHUL Physics Department TWiki? Send feedback