Large shelving

• 1m x 2m x 500mm deep 4off - ordered
• 1m x 2m x 300mm deep 3off - ordered (from RS http://docs-europe.electrocomponents.com/webdocs/001b/0900766b8001b68f.pdf)
• 1m x 2m x 500mm 3off: shelves on one bay; plastic bins on two bays ordered

Small shelving

• 4 off, hardware drawer cabinets for small parts, I like Akro-Mills drawer system (wall-mountable and stackable): 64-bins: http://www1.mscdirect.com/CGI/NNSRIT?PMPXNO=8239818&PMT4NO=92021404 (Alternative RS 230-598 or RS 556-020 steel frame)
• 4 off, wall-mount cable hanger for BNC-size cables
• 2 off, wall-mount cable hanger for Lemo-size cables

Furniture

• 250x120 cm White board
• 2 off, 70 cm height book shelves
• 3 off, 200 cm book shelves

Vacuum and gas

• 2 off, 50' roll of 1/4" Cu tubing for gas lines
• 3 off, 3' long 1" diameter vacuum hose
• 3 off, 1' long 1" diameter vacuum hose
• 50 each 1/4" swagelok fittings (nut, sleeve, cap, e.g. http://www.mcmaster.com/#swagelok-compatible-tube-fittings/=dgywr2)

Connectors etc

• 5 each 10x BNC attenuators (e.g. from Digikey http://search.digikey.com/scripts/DkSearch/dksus.dll?Cat=2491209&k=kits, or Pasternack)
• 10 each BNC F-F RS 700-9489 ordered
• 10 off LEMO F-F
• 10 off BNC tees
• 10 off LEMO tees
• 10 each BNC 50 ohm terminators
• 20 each BNC male to lemo female, " lemo make to BNC female adapters
• general purpose capacitor kit, e.g. http://search.digikey.com/scripts/DkSearch/dksus.dll?Cat=2490603&k=kits
• general purpose resistor kit, e.g. http://search.digikey.com/scripts/DkSearch/dksus.dll?Cat=2490615&k=kits
• 20 4' BNC cables (or the parts to make them)
• 20 4' SHV cables (or the parts to make them)

Tools

• Wheeled tool chests 2off RS 722-7198 ordered
• Crimping tools (D-type, Burndy, SMA, BNC, Lemo, CAT-5, MCX)
• Complete tool sets
• 3 off, multimeters (handheld)
• 1 off, HV multimeter
• Label maker 1off RS 456-6223 ordered
• Calipers, levels, sets, measures
• portable soldering iron (e.g. OKi MFR-1160 http://search.digikey.com/scripts/DkSearch/dksus.dll?vendor=0&keywords=mfr-1160 and the only two tips I've ever need are: Metcal SSC-626A (http://search.digikey.com/scripts/DkSearch/dksus.dll?WT.z_header=search_go&lang=en&site=us&keywords=ssc-626a&x=0&y=0) and Metcal SSC-638A (http://search.digikey.com/scripts/DkSearch/dksus.dll?WT.z_header=search_go&lang=en&site=us&keywords=ssc-638a&x=0&y=0)
• stuff for soldering (wire strippers, heat-shrink, heat-gun, panavise and wire: e.g. Strippers ($15): http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail&name=PA70058-ND Heat-shrink tubing kit ($20): http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail&name=FP-KIT-ND Heat-gun ($40): http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail&name=SDL1700-ND Panavise ($20): http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail&name=201PV-ND Wire kit: ($220): http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail&name=HU-KIT-20-ND

Electronics

• 2 off, NI multifunction cards + break out boxes
• 2 off, Network hubs
• CISCO network concentrator, switch, etc
• 4 off, low voltage/current supplies (e.g. 0-30 V, 2A)

General items

• 3off 12way mains distribution boards RS 314-5421 ordered
• 4off Test Lead Holders (various cable widths) Farnell 4136111 and 8471606