Darco

• Several rebuilds with improvements to grounding and field cage attachment
• Still no light
• HOWEVER!
• 
• Lens on the CCD was stopped down to f/5.6, cutting roughly 90% of its area
• Opened lens wide to f/1.8
• I now see light!
• Took a series of 60 images, 2 second exposure and combined them to show how the source glows
• All are 2x2 binning
• 
• Z axis has been compressed to show the spread of light... This is at very low dift field.
• 

• A560_C050_E2_S60.gif:
  

• A560_C100_E2_S60.gif:
  

• A560_C200_E2_S20.gif:
  
• Strange how it seems the glow reduces with increased drift field... early days yet
• Cross pattern is likely the alighment of the amplification region mesh.

• Image of the Mesh... Patterns are in same directions as the mesh x and y
  

• Finally some light!
• Need to move the source... probably use a lower intensity source.

HPTPC

• T111 appears complete, minor cosmetic things such as, cleaning the floor, some minor water work, looks like a lab!
• Need to layout where things should go on the floor to organise space, power cables etc.